🖼️
📐 Plan
LV2 · Toolooo Standard
Explore → See → Understand → ActUnderstand it. Feature Level describes the depth of the tool experience.

Frame Fit Finder

See your artwork placed inside candidate frame sizes before you buy one.

ArtPrintFraming
in
in
in
Planning estimates, not exact cut specs — actual mat-cutting tolerances vary by framer.
Mat opening needed
4.0" × 6.0"
Artwork as displayed
4.0" × 5.0"
Fit quality
Loose
Crop needed
0% — matted
⚠
Proportions don't quite match — expect visible matting on two sides
Your artwork is wider relative to this opening than the frame is, so it'll be centered with extra top/bottom mat space rather than filling the whole opening. Try a different frame size above, or turn on "Crop allowed" to fill it completely by trimming about 17% off the width.
What this tool does and why

Before you start

What

See your artwork placed inside candidate frame sizes before you buy one.

Why

Artwork, matting, and frame dimensions must be compared together to avoid ordering a frame that does not visually or physically fit.

Your Result and Action update in the tool as you change its inputs.

Model note

This browser-side model explains the inputs you choose. Check an important decision against the real system, brief, or production constraints.

Next

Use the result to choose a connected next move.

Drawing Grid MakerGenerate and download a proportion grid overlay for any canvas size — for tracing, scaling, or practice.Bleed & Safe Area BuilderGenerate a downloadable bleed and safe-area guide for any print size.
How this tool stays honest

How it works

Enter your artwork's dimensions and preview it placed inside standard and custom frame sizes, with matting accounted for, so you can pick a frame that actually fits before you order it.

Assumptions

The tool runs in your browser and models the information you provide. It does not know facts outside that model.

Limitations

Results are estimates based on the entered assumptions. Supplier specifications, team constraints, tolerances, and real-world conditions may require a different final plan.

Understand Frame Fit Finder

What this tool helps you understand

Enter your artwork's dimensions and preview it placed inside standard and custom frame sizes, with matting accounted for, so you can pick a frame that actually fits before you order it.

When to use it

Before ordering a frame and mat for an artwork.

Try a scenario

Compare the artwork dimensions with a frame opening and mat allowance. Confirm whether the supplier quotes outer or usable dimensions.

How to read the result

Use the calculated fit, spacing, timing, or risk as a planning baseline, then verify it against the physical, commercial, or technical constraints of the real project.

Assumptions and limits

Results are estimates based on the entered assumptions. Supplier specifications, team constraints, tolerances, and real-world conditions may require a different final plan.

Toolooo is part of Khizooology, created byKhizar Imtiaz (khizooo).